ASE Systems
The Ergonomics and Productivity Specialists
Contact Site Map Home

Call us at
1-800-245-2163
for more information

Roll, Coil & Reel Movers




Air Jacks Air Pallets Air Planks
Coil & Reel Movers Load Modules Floor Surface

Transporting heavy paper rolls, metal sheet coils and large reels can be a difficult, time-consuming task unless you use ASE System's air caster roll moving products which will allow the operator to move heavy inventory with the greatest of ease. ASE offers a complete line of roll, reel and coil handling equipment that will help save time, increase productivity, and reduce the chances of worker injuries and damage to your product. Because the roll mover literally floats the load on a thin film of compressed air, as little as one pound of push can move 1,000-lbs of weight; so one person can easily transport, rotate and precisely position even the largest and heaviest rolls.


Roll mover

  • Standard equipment includes inverted U-type handle, no-load wheels, pressure regulator and on/off ball valve.
  • Standard configuration for no-load wheels is front 2 fixed, rear 1 swivel.
  • Optional squeeze throttle control.
  • Non-standard roll diameter ranges are available. Specify roll diameters between 24" minimum and 84" maximum.
  • Roll diameter specifications are based on hard paper rolls. If unit is to be used for soft paper, contact ASE to determine the correct equipment specification.

Move Metal Sheet Coils, Large Reels & Heavy Paper Rolls On A Film of Compressed Air

SPECIFICATIONS
Model Number Fork Length Roll Diameter in Inches Unit Width
in Inches		 Net Weight
in Pounds
Min Max
8,000-Pound Capacity
RC4A5424N 24 24 54 36-38 112
RC4A8424N 24 54 84 40-43 114
RC4A5430N 30 24 54 36-38 120
RC4A8430N 30 54 84 40-43 122
RC4A5436N 36 24 54 36-38 130
RC4A8436N 36 54 84 40-43 134
RC4A5442N 42 24 54 36-38 140
RC4A8442N 42 54 84 40-43 144
RC4A5448N 48 24 54 36-38 150
RC4A8448N 48 54 84 40-43 154
RC4A5454N 54 24 54 36-38 170
RC4A8454N 54 54 84 40-43 174
RC4A5460N 60 24 54 36-38 180
RC4A8460N 60 54 84 40-43 184
12,000-Pound Capacity
RC6A5430N 30 24 54 42-44 130
RC6A8430N 30 54 84 46-49 134
RC6A5436N 36 24 54 42-44 140
RC6A8436N 36 54 84 46-49 144
RC6A4542N 42 24 54 42-44 150
RC6A8442N 42 54 84 46-49 154
RC6A5448N 48 24 54 42-44 162
RC6A8448N 48 54 84 46-49 164
All models require ¾" NPT plant air hookups. For all RC4A models, total air volume recommended is 70 SCFM. For all RC6A models, total air volume recommended is 74 SCFM.


This diagram shows the parts of the roll mover.

ASE Systems
Toll Free: 800-245-2163
Fax: 281-256-7451
Cypress, TX