Capabilities:
 Easily covers small
floor gaps, cracks and joints.
Easily rolls out
over travel path to cover small floor gaps, cracks, and joints.
No danger of corrosion
outdoors.
Rollout over long
sections of porous surfaces without taping seams as with smaller sized
sheets.
Lighter and easier
to handle than sheet metal. |
| Using
4’ x 8’ polystyrene sheets this manufacture moves its 40-ton
concrete structures through the assembly process. |
|
|
|
| Using
a series of 4’ x 8’ overlays this installation crew moves a 30-ton
chiller from a temporary metal deck to its permanent concrete
foundation. |
|
|
|
On
two 100’ long x 60” wide polyethylene rollout overlays, this manufacturer
moves a 100-ton catamaran ship hull out of the assembly plant. |
| Specifications: |
| Tested
Properties: |
Minimum
Values: |
Density,
g/cm3
|
0.94
|
Strength
at Break, Ib/in-width (N/mm)
|
243
(43)
|
Strength
at Yield, Ib/in-width (N/mm)
|
130
(23)
|
Elongation
at Break, % G.L. 2.5 in (64 mm)
|
560
|
Elongation
at Yield, % G.L. 1.3 in (33 mm)
|
13
|
Tear
Resistance, Ib (N) ASTM D
|
45 (200)
|
Puncture
Resistance, Ib (N) FTMS 101, Method
|
80 (356)
|
Carbon
Black Content, %
|
2.0
|
Environmental
Stress Crack Resistance, hr
|
1500
|
Thickness,
mils (mm)
|
60 (1.5),
other thicknesses available
|
Roll
Length (approximate), ft (m)
|
420
(128)
|
Low
Temperature Brittleness, of (0C)
|
<-107
«-77)
|
Oxidative
Induction Time, minutes
|
100
|
|
|
Made from proprietary resins, specifically designed for strength & durability.
Outstanding strength
and stiffness properties.
Demonstrated ability
to withstand the rigors of direct exposure to the sun and ultraviolet
light.
Excellent chemical
resistance.
Proven history
of success.
Note: Polystyrene and Polyethylene rolls are available in 22.5’ wide x hundreds of feet long with varying
thicknesses up to 80-mils. A cutting charge will apply on narrow rolls. |
|
