Electric Powered Vacuum Lifters

Click below to see a demonstration video of our vacuum lifters.

Horizontal Sheet Lifter

Lift & Tilt

ASE electric powered vacuum generators feature high capacity pumps, valves, filters and gauges for trouble-free operation in the most demanding production environments. Designed for use with a wide assortment of vacuum lifter assemblies and interchangeable pad attachments. These high quality Vacuum Packs are ruggedly built, yet affordably priced for unmatched value. All air powered generators feature a sturdy welded frame construction for heavy weight load lifting capability.

Features:

• Front Mounted Controls and Gauges
  Vacuum gauge is mounted on front cover for continuous monitoring by operator. The power switch includes built-in circuit breaker. Also included is a filter view port to monitor filter for cleaning.
• Ergonomic Adjustable Front Handlebar
  Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads.
• Slide Control Valve with Standard Safety Lock
  The slide valve assembly allows vacuum attach and release and is mounted to the front handlebar for convenient access by the operator. The standard safety lock is to keep the slide valve in the attach position while lifting a load to prevent accidental load release.
• Vacuum Check Valve and Reservoir
  A check valve with vacuum reservoir helps to maintain vacuum if electrical power is interrupted, for safe handling of non-porous loads.
• Twistlock Power Cord Plug and Receptacle
  Both Twistlock plug and receptacle are provided to prevent accidental power cord separation.
• Vacuum Leakage Sensing System (VLS-08 & VLS-08-20)
  The VLS-08 (Series) are battery powered units consisting of solid state circuitry with microprocessor, pressure sensor, LCD digital display in inches of Hg, warning audible horn and red light. System is plumbed to the Vac-Pack and monitors vacuum level triggering the alarm in the event of a loss in vacuum level (10% loss for VLS-08 / 20% loss for VLS-08-20).

Maintenance:

• Oil-Less Dry Piston Vacuum Pump Motor
  Powerful ½ horsepower motor drives a high-performance 4.3 CFM dry piston vacuum pump.
• Air Filter
  High capacity air filter provides protection against pump damage. It is mounted behind the front cover which has a view port for routine inspection.
General:
• Vacuum Pump Description
  High-performance oil-less dry piston pump has a ½ hp motor capable of generating 4.3 cfm. Motor is thermally protected and is rated for 100% duty cycle.
• Frame Construction
  The VPF-57-AC Series has a fully welded frame with a vacuum reservoir and a lifting bale and beam mounting hardware. Standard for 3"x3" beam [9" hardware centers] with a structural lifting capacity rating up to 2,200 lbs (998 kg). Heavy Duty for 3"x6" beam [9" hardware centers] and reinforced lifting bale with a structural lifting capacity rating up to 4,400 lbs (1,996 kg).
• Versatility
  For larger load lifting capability or alternate power requirements, ANVER also offers other electric, air powered, and self-powered mechanical vacuum generators. All units are provided with standard modular mounting designs for interchangeability.

Options:

• Optional Moisture Trap (WT-PF)
  For damp applications: prevents moisture saturation of filter and possible damage to pump. Not for handling wet loads.

Single Pad Electric Powered Vacuum Lifters for Lifting Concrete Slabs weighing up to 2000-lbs (909 kg) By utilizing modular interchangeable components thousands of lifter configurations are available. Lifter capacities range from 250-lbs to 20,000-lbs with special vacuum units rated at up to 60,000-lbs. All powered vacuum lifters are built in strict accordance with OAHA and ANSI regulations for safety and construction

Three Pad In-Line Electric Powered Vacuum Lifter with Foam Seal Vacuum Pads for Lifting Granite Slabs 10 ft x 3 ft (3 m x 1 m) weighing up to 1500-lbs (680 kg) We offer vacuum lifting systems with dozens of beam lengths, Vacuum-Pump Stations, crossarms, vacuum pads and suspensions to allow custom lifting equipment at standard prices and deliveries. Air-powered, electric and battery powered vacuum lifters are all available. Small and compact models are also available. Premium components with prime fit and finish are used throughout. ASE Systems vacuum lifting systems meet or exceed all current OSHA and ANSI regulations for safety and overall construction. Numerous pad attachments and beam assemblies are available to customize a vacuum lifter to your specific needs.

Fill out the form below to request more information or to request a quote.

ASE Systems
Toll Free: 800-245-2163
Fax: 281-256-7451
Cypress, TX