Roll, Reel & Coil Handling Equipment

Transporting heavy paper rolls, metal sheet coils and large reels can be a difficult, time-consuming task unless you use ASE Systems' roll moving equipment.

ASE offers a complete line of roll, reel and coil handling equipment that will help save time, increase productivity, and reduce the chances of worker injuries and damage to rolls. Because the Roll-Mover literally floats the load on a thin film of compressed air, as little as one pound of push can move 1,000-lbs of weight. So one person can easily transport, rotate and precisely position even the largest and heaviest rolls, coils and reels.

One person can easily transport, rotate and precisely position even the largest and heaviest rolls, coils and reels.

4Standard equipment includes inverted U-type handle, no-load wheels, pressure regulator and on/off ball valve.
4Standard configuration for no-load wheels is front 2 fixed, rear 1 swivel.
4Optional squeeze air throttle control.
4Non-standard roll diameter ranges are available. Specify roll diameters between 24" minimum and 84" maximum.
4Roll diameter specifications are based on hard paper rolls. If unit is to be used for soft paper, contact ASE to determine the correct equipment specification.

The low profile and ease of movement of the Roll-Mover allows for maneuvering even in tight spaces.

SPECIFICATIONS
Model Number	Fork Length	Roll Diameter in Inches		Unit Width in Inches	Net Weight in Pounds
Model Number	Fork Length	Min	Max	Unit Width in Inches	Net Weight in Pounds
8,000-Pound Capacity
RC4A5424N	24	24	54	36-38	112
RC4A8424N	24	54	84	40-43	114
RC4A5430N	30	24	54	36-38	120
RC4A8430N	30	54	84	40-43	122
RC4A5436N	36	24	54	36-38	130
RC4A8436N	36	54	84	40-43	134
RC4A5442N	42	24	54	36-38	140
RC4A8442N	42	54	84	40-43	144
RC4A5448N	48	24	54	36-38	150
RC4A8448N	48	54	84	40-43	154
RC4A5454N	54	24	54	36-38	170
RC4A8454N	54	54	84	40-43	174
RC4A5460N	60	24	54	36-38	180
RC4A8460N	60	54	84	40-43	184
12,000-Pound Capacity
RC6A5430N	30	24	54	42-44	130
RC6A8430N	30	54	84	46-49	134
RC6A5436N	36	24	54	42-44	140
RC6A8436N	36	54	84	46-49	144
RC6A4542N	42	24	54	42-44	150
RC6A8442N	42	54	84	46-49	154
RC6A5448N	48	24	54	42-44	162
RC6A8448N	48	54	84	46-49	164

All models require ¾" NPT plant air hookups. For all RC4A models, total air volume recommended is 70 SCFM. For all RC6A models, total air volume recommended is 74 SCFM.

This diagram shows the parts of the Roll-Mover.

ASE Systems
Toll Free: 800-245-2163
Fax: 281-256-7451
Cypress, TX